Sale!

TIG200 Amp AC/DC TIG Welder for Steel and Aluminum plus free foot pedal

$899.00

Joseph’s Welding TIG200AC/DC is a square-wave inverter TIG/Stick (MMA) welder, High Frequency start hand torch control and precise foot pedal welding heat control. This compact, versatile TIG200 offers user a simple array of controls to accurately set the welder to perform under a wide variety of situations. Its square-wave inverter enables accurate welding of fine Aluminium. It is perfect for a professional or a weekend enthusiast who is looking to get industrial quality features in a hardworking, affordable welder.
Design for welding Aluminium, Stainless Steel, Mild Steel, and other metal materials.

The Joseph’s welding TIG200 AC/DC Features:

  • Operates on 240vAC, 30-amp circuit.
  • 6mm(1/4″)-thick welding capacity on 240VAC.
  • High-frequency start for precise arc control.
  • Square-wave inverter for accurate aluminium welding.
  • Flex Head WP-17-type torch accepts common cups and collets with up to 1/8″ electrodes.

Package Includes:

  • TIG200ACDC Inverter AC/DC TIG stick welder
  • TIG torch WP17
  • Stick welding electrode holder
  • Ground cable & clamp
  • Argon regulator/Flow Gauge
  • Foot pedal
  • Chipping hammer and steel brush
  • Welding Mask
  • user Manual

 

Category:

Description

Specifications
  • Input Voltage: Single-Phase 240vAC at 50-60Hz
  • Input Current TIG: 240v: 23.8 amps
  • Input Current Stick: 240v: 36.2 amps
  • Output Current Adjustment TIG: 240v: 10-190 amps
  • Output Current Adjustment Stick: 240v: 10-185 amps
  • Input Voltage TIG: 240v: 10.4v -17.6v
  • Input Voltage Stick: 240v: 20.4v -27.4v
  • Starting Methods: High Frequency
  • TIG Welding AC Duty Cycle (%): 240v 60% at 190 amps; 100% at 143 amps
  • STICK Welding Duty Cycle (%): 240v 60% at 185 amps and 100% at 143 amps
  • Post Gas Flow: 2-8 sec.
  • Pre Gas Flow: 0.1-1.0 sec.
  • Remote Foot Pedal And Control: Yes
  • Torch Control: Finger on/off control/Variable foot pedal
  • Cooling Method: Fan
  • Overall Dimensions: 69 x 30 x 56 cm
  • Weight: 26.5kg

 Duty Cycle

The Rated Duty Cycle refers to the amount of welding that can be done within an amount of time. The Joseph’s Welding TIG 200 has a duty cycle of 60% at 190 Amps. It is easiest to look at your welding time in blocks of 10 Minutes and the Duty Cycle being a percentage of that 10 Minutes. If welding at 190 Amps with a 60% Duty Cycle, within a 10 Minute block of time you can weld for 6 Minutes with 4 Minutes of cooling for the welder. To increase the Duty Cycle you can turn down the Amperage Output control. Going above 190 Amps will yield a lower duty cycle.

Safty Information

Always follow manufacturer’s instructions for proper safety requirements when performing welding tasks.

Warrenty: 30 days refund if equipment faults or can’t fix the issues, and 12 months limited warranty (repair or replacement) within Australia

* For any Limited Warranty claim, a valid Proof of Purchase from our Authorized Dealers within Australia.

Reviews

There are no reviews yet.

Be the first to review “TIG200 Amp AC/DC TIG Welder for Steel and Aluminum plus free foot pedal”

Your email address will not be published.